This site is currently under active construction, be sure to check back soon for more updates!
Touchless Ball Removal Flag Stick
- Ball Removal with only putter contact
- Eliminates bending over for ball removal
- Made in the USA
- Complete self-contained flag stick (not a kit)
USGA PART 8. I. - THE FLAGSTICK
COMMITTEE EQUIPMENT REQUIREMENTS
Attachments to the pole that are generally circular in cross-section and no greater than 2 inches (50.8 mm) in dimension perpendicular to the pole.
-
Attachments to the pole may be permitted more than 3 inches (76.2 mm) above the putting green surface provided that they fall within at least one of the following categories:
Attachments to the pole that are generally circular in cross-section and no greater than 2 inches (50.8 mm) in dimension perpendicular to the pole. -
Attachments to the pole may be permitted more than 3 inches (76.2 mm)
below the putting green surface but must be constrained to this area - Must have a constant diameter of no greater than 0.75 inches (19 mm) from a point 3 inches (76.2 mm) above to 3 inches (76.2 mm) below the putting green surface.
- Must not incorporate features, including its material composition, designed to act in a shock absorbing manner or have shock absorbing properties upon impact with the ball
- NOTE: NICE OUT FLAGSTICK IS CURRENTLY UNDER REVIEW BY THE USGA FOR CONFORMANCE