This site is currently under active construction, be sure to check back soon for more updates!
Touchless Ball Removal Flag Stick
- Ball Removal with only putter contact
- Eliminates bending over for ball removal
- Complete self-contained flag stick (not a kit)
- Made in the USA
USGA PART 8. I. - THE FLAGSTICK
COMMITTEE EQUIPMENT REQUIREMENTS
- Attachments to the pole may be permitted more than 3 inches (76.2 mm) above the putting green surface provided that they fall within at least one of the following categories:
• Attachments to the pole that are generally circular in cross-section and no greater than 2 inches
(50.8 mm) in dimension perpendicular to the pole. - Attachments to the pole may be permitted more than 3 inches (76.2 mm) below the putting
green surface but must be constrained to this area - Must have a constant diameter of no greater than 0.75 inches (19 mm) from a point 3 inches
(76.2 mm) above to 3 inches (76.2 mm) below the putting green surface. - Must not incorporate features, including its material composition, designed to act in a shock
absorbing manner or have shock absorbing properties upon impact with the ball.
NOTE: NICE OUT FLAGSTICK IS CURRENTLY UNDER REVIEW BY THE USGA FOR
CONFORMANCE
